How to Reset a PS4 Controller: 7 Simple Steps That Work

When You Need to Know How to Reset PS4 Controller

Knowing how to reset PS4 controller is useful when the controller stops behaving normally. A reset can fix a controller that will not pair, a controller that flashes white and never connects, buttons that seem stuck, or a connection that drops again and again. It is a simple process that takes less than a minute, and it does not delete your games or your console settings. It only returns the controller to its default state.

You should try a reset after the easy fixes, such as a different USB cable and a console restart, have not worked. A how to reset PS4 controller fix is not the first step for every problem, but it is the right step when the controller itself seems to be the problem. This guide explains the soft reset and the hard reset, when to use each one, and what to do after the reset so the controller pairs cleanly again.

Soft Reset vs Hard Reset: Which One Do You Need?

There are two kinds of reset for a DualShock 4. A soft reset is done from the console menu. You turn the console on, go to Settings, then Devices, then Bluetooth Devices, choose the controller, and select Disconnect or Forget Device. This breaks the pairing between the console and the controller, and it is enough when the controller is acting oddly but still connects.

A hard reset uses the small hole on the back of the controller. You press a paperclip into the hole for a few seconds, which resets the controller hardware itself. Use a how to reset PS4 controller hard reset when the controller will not connect at all, when it flashes white and never pairs, or when a soft reset has not helped. The hard reset is the main method in this guide.

How to Reset PS4 Controller: 7 Simple Steps That Work

Follow the steps in order. The whole process takes about a minute, plus the time to pair the controller again.

1. Turn off the console and unplug the controller

Turn the PS4 off fully, or at least make sure the controller is not connected. Unplug any USB cable from the controller, and set the controller down on a flat surface with the back facing up. Working with the console off avoids confusion, because the controller will not try to reconnect while you reset it.

2. Find the small reset hole on the back

Turn the controller over. Near the top, beside the screw on the right hand side, you will see a tiny hole. That is the reset button. It is small, so you may need good light to spot it. Do not confuse it with the screw itself, and do not poke anything into the screw hole. The reset hole is the tiny opening beside it.

3. Choose a safe tool for the reset button

Use a paperclip, a SIM ejector tool, or a thin pin with a blunt end. Do not use a needle or anything very sharp, because it can damage the button inside, and never force the tool.

4. Press and hold the reset button for five seconds

Push the tool gently into the hole until you feel a small click, then hold it for about five seconds. Do not push hard, and do not wiggle the tool. Five seconds is enough to reset the controller. When the time is up, pull the tool out gently. The controller is now reset, and its light should be off.

5. Connect the controller to the console with a USB cable

Take a USB data cable and connect the controller to the PS4. Use a cable you know works for data, not a charge only cable, and use the cable that came with the console if you still have it. The cable is needed for the first pairing after a reset, because the controller has forgotten the console and needs the cable to find it again.

6. Press the PS button to pair the controller again

Turn the console on, then press the PS button in the centre of the controller. The light bar should stop flashing and change to a solid player colour, usually blue for player one. Wait a few seconds for the pairing to finish. If the light stays white, try a different cable, and check that the cable is plugged in firmly at both ends.

7. Test the controller before you play

Once the how to reset PS4 controller pairing is done, test it before you start a game. Move both sticks in circles, press every button, test the triggers, and check the touch pad. Play a game you know well for a few minutes, and check that the controller stays connected. If the original problem is gone, the how to reset PS4 controller fix worked. If the problem returns at once, the fault may be hardware, so see the advice at the end of this guide.

What a Reset Does and Does Not Do

A how to reset PS4 controller reset returns the controller to its default settings, and it clears the pairing with the console. It does not delete your games, your saves, or your console settings, because those live on the console, not on the controller. It does not fix a worn stick, a broken button, or a dead battery, because those are hardware faults, not settings faults.

What to Do If How to Reset PS4 Controller Does Not Work

If the controller still will not pair after a reset, try a different USB cable and a different port on the console. Some cables look fine but do not carry data, and a faulty cable is the most common reason a reset seems to fail. Next, restart the console fully, then try pairing again. Check that the controller charges, because a very flat battery can stop pairing.

If the controller pairs with a cable but drops when you unplug it, Bluetooth may be the problem, so move closer to the console. If it still fails on every cable and console, the fault is likely inside the controller, so contact the seller or a repair specialist.

Related reading: PS4 Controller Flashing White? 7 Quick Fixes Explained and PS4 Controller Not Connecting? 7 Fixes That Actually Work

Frequently Asked Questions

How do I reset a PS4 controller with the button on the back?

For how to reset PS4 controller with the button on the back, turn the controller off, find the small hole on the back near the top, and push a paperclip gently into it for about five seconds. Then connect the controller to the console with a USB cable and press the PS button to pair it again. The light should change to a solid player colour.

Will resetting my PS4 controller delete my games?

No. A how to reset PS4 controller step will not delete your games, your saves, or your console settings. A reset only clears the controller pairing and returns the controller to its default state. Your games and saves are stored on the console, so they are not affected by a controller reset.

How often should I reset my PS4 controller?

You should only use how to reset PS4 controller steps when the controller has a problem, such as failing to pair, flashing white, or dropping connection. There is no need to reset it regularly, and a controller that works well should be left alone. Use a reset as a fix, not as routine maintenance.

What if my PS4 controller still will not connect after a reset?

If how to reset PS4 controller steps did not work, try a different USB data cable and a different port, restart the console fully, and charge the controller for at least an hour. If it still will not pair, try it on another console if you can. If it fails everywhere, the controller may have a hardware fault, so contact the seller or a repair specialist.

Conclusion

Learning how to reset PS4 controller gives you a quick fix for pairing and connection problems. Use a soft reset from the console menu when the controller still connects, and use the hard reset hole on the back when it will not connect at all. After the reset, pair again with a USB data cable, press the PS button, and test the controller before you play. If the reset does not solve the problem, check the cable, the battery, and the console, and seek repair advice rather than repeating the reset again and again.

Leave a Reply